Payment & Shipping Terms:
|Product Name:||Push Back Racking System||Material:||Metal|
|Surface Treatment:||Powder Coating||Wide Size:||Custom|
Metal Push Back Racking System / Radio Shuttle Push Back Shelving
Push Back Racking System Introduction
Push Back Racking System are designed to multiple layers trolley connected with the front and the rear beam. The pallet or pallet box is put on the trolley from outside, and the subsequent pallet will push the prior one to inside. The trolley crosses on the slanted guide rail. When the outer pallet is taken away, the inside trolley will slide down automatically. Push-back Racking is suitable for storing goods of large quantity but small variety, the operation principle is FILO. Storing and taking goods are in the same side.
How to Use Push Back Racking System
Push Back Racking System detail
Cart - Bearings – Rails – Anti-Slip Steel – Rail Bracket – Front Stopper
Push Back Racking System function
Push-back rack, also known as push-in rack, are connected by multi-layer carts between the front and rear beams. Stacked goods are pushed into the carts from the outside, and the stored goods will push the original goods into it. It is usually used in places where the storage space is extremely limited, but the storage capacity must be increased or the time required for the goods must be increased.
The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.
The press-in racking system has higher requirements for the manufacturing accuracy of the rack. Because the cooperation between the pallet cart and the guide rail is high, the manufacturing and installation accuracy is strict. Failure to do so will cause the racking system to run poorly and affect work effectiveness.
The cost of press-in rack is higher, which is directly proportional to its value. Its warehouse utilization rate reaches about 80%, and the space utilization rate of the warehouse can be improved.
It is more than 30% high, easy to access and flexible, and is the rack with the highest storage efficiency.
Push Back Racking System application
Contact Person: Iris Chan